The project for today is a boxer with a fly front, instead of the easy closed centre front seam. Please subscribe to the blog in order to receive the free pdf version of this multi sized pattern, with printing instructions. The pattern is for sizes small, medium, large and xtra large.
For this project you will need:
Cotton fabric or printed satin (0,50 cm for size small)
Quality polyester sewing thread
3 cm wide waist elastic
Fold the fabric right sides together. Pin the pattern to the fabric and cut two panels out.
Iron a 3 cm strip of interfacing/vilene to the wrong sides of the fly and fly shield and 6 cm from the top edge.
With right sides together, pin the 2 front crotches together and machine stitch.
Press 1/2 cm of the right fly extension to the wrong side.
Fold the fly in half and pin and tack in place.
Machine stitch on the edge.
Press 1 cm of the left fly extension to the wrong side.
Pin the right fly extension on top of the left fly extension.
Mark the stitching line as illustrated. Machine stitch in place.
Overlock the crotch seam at this stage.
Tack the left fly extension to the garment. Machine stitch on the folded edge and up to the previous stitching line.
Make a mark for the buttonhole on the right side. Sew the buttonhole and mark the position of the button on the fly shield.
Sew the button in place. The front is now complete.
With right sides together, pin and stitch the centre back seams together.
Pin and stitch the inner leg seams together.
Fold the leg hem over 1/2 cm and press. Fold over 1 cm and press. Pin/tack in place and machine stitch the hem.
Pin and stitch 6 cm down on the centre front panel to hold the two fly extensions together.
Cut the required length of elastic. Overlap the two ends about 2 cm and use a zigzag stich to sew it together.
Devide the waist in 4 with pins. It also known as quarter pinning. Repeat the same for the elastic.
Place the elastic on the wrong side of the shorts, while matching the pins of the shorts and elastic.
Overlock the elastic to the waist, while stretching the elastic at the front and back simultaneously.
Fold the casing over and pin in place.
Machine stitch the edge of the casing while stretching the elastic at the front and back. Stitch the centre of the casing while stretching the elastic at the front and back.
Voila! The shorts is completed.
Have a jolly good week!
The owner of this blog may be compensated as a result of your actions originating from this blog. Some of the links to third party websites may be referral links, and as such the webmaster stands to earn a commission from any resulting purchase.